Located in Woonsocket, SD, we create Fiberglass RAM AIR HOODS with years of industry experience. Made from OEM engineered materials, RAM AIR HOOD creates a perfect fit and finish every time.
39778 Hwy 34
Woonsocket, SD 57385
Phone: (605) 796-4597
Fax: (605) 796-1497
Our hoods come with detailed instructions that show you how to easily install your hood in about 30 minutes. It is recommended that you prefit your hood before installing hardware. Just install your hood and adjust it according to the instructions provided. It’s that simple!
There is a subtle difference in that our hood design does not have the small grooves around the ram air vents. We eliminated them for a smoother-looking appearance. Our hood comes with the original factory injection molded plastic vent grilles and ram air decals to give it that original ISO look.
Our hoods have a built-in water management system consisting of four (4) built-in water shields to prevent water from getting in. To date, we have not had a complaint of water getting into an intake.
We have not performed any test, however, you will feel a noticeable power difference, especially when you accelerate at around 50-75 mph. More air is forced into the intake at a higher rate of speed and then generates the horsepower gain you will receive, especially in colder weather. The high flow filter will produce a more high performance sound from your vehicle’s engine.
Yes, where you see the term “power hood” listed by the product, it means that the hood delivers air to the intake under pressure in a sealed system, which creates more HP then a cold air intake that has to suck the air into the intake. (See ram air comparison on the side bar for more info)
Even though we package our products very well, occasionally the freight carrier will damage our product. In that case, refuse the shipment and do not sign for it. It is expressly recommended that the package be opened and inspected immediately upon receipt, even if the box looks undamaged.
CAUTION!!! If you sign off with the freight carrier on a damaged product, they will not honor any freight damage claim at a later date and you will be held responsible.
CAUTION!!! If you are having someone besides yourself receiving your package you must make it clear to them that they are not to sign off with the freight carrier until they have inspected the product and found it to be ok. If you have to refuse our product because it was damaged, simply call us and we will send you out another one ASAP. If you or someone else signs off on a damaged product, we will not be held responsible. You must refuse it!
Yes, it is highly recommended that any hood be prefit before it is painted. This is especially true with fiberglass parts. If you are not the original owner it is possible that the vehicle was in a previous accident, which could effect how our product fits you vehicle.